Home / Microphone test / Micchek
Microphone testMicchek
A live microphone test that runs entirely in your browser. Level meter, oscilloscope, spectrum, recorder and playback — no download, no account, nothing uploaded.
You are probably looking for a mic check. Spelling aside, the tool above is the thing you want: press Start test, allow the microphone, and read the level meter.
Micchek: the full method
- Pick the right input
Open the device list at the top of the console. Every microphone the system can see is listed by name. Choose the one you actually intend to use — the default is often a webcam or a virtual cable.
- Press Start test and allow access
The browser shows a permission prompt. Choose Allow. Nothing is recorded until you press Record, and even then the audio stays on your machine.
- Speak at your normal distance
Say a full sentence at conversational volume, sitting where you normally sit. The meter should swing between -24 dB and -6 dB. A flat meter means no signal is arriving.
- Check the waveform for damage
Open the Waveform panel. A healthy voice looks like rounded peaks with space above and below. Flat tops touching the edges mean the signal is clipping and words will sound crunchy.
- Record and play it back
Levels can look perfect while the audio sounds terrible. Record five seconds, play it back, and listen for hiss, hum, echo and keyboard noise.
- Read the report
The Report panel names the device, its sample rate and channel count, whether echo cancellation and auto gain are active, and gives a plain verdict you can copy into a support ticket.
If the meter does not move
- Something else has the microphoneZoom, Teams, Discord, OBS and Camera apps can hold an input exclusively. Quit them completely, including from the system tray, and try again.
- A hardware mute is engagedMany headsets mute when the boom is rotated up, and most USB mics have a mute button that stays lit. Check the physical control before touching any software.
- The browser was never allowedClick the padlock or slider icon at the left of the address bar, set Microphone to Allow, then reload the page. A blocked prompt never appears twice on its own.
- The wrong device is selectedChange the input in the dropdown and the test restarts automatically. Laptops frequently default to a webcam mic rather than a plugged-in headset.
The order to change things in
Position first, gain second, processing last. Moving from 60 cm to 20 cm raises your voice by roughly 10 dB while leaving the room noise exactly where it was — an improvement no software setting can match.
Gain comes next because it lifts your voice and the room together; it fixes quiet, never unclear. Processing comes last because every effect works on whatever the first two decisions produced. Applied to a good signal it is subtle and useful. Applied to a distant voice in a noisy room it has to remove so much that it damages the voice too.
Frequently asked
Why does the browser ask for permission every time?
Some browsers only remember the choice for the session, and private or incognito windows always forget it. Allowing the site in your browser's site settings makes the choice permanent.
The test works but people still cannot hear me
Then the microphone is fine and the app is not. Open that app's audio settings and select the same device you chose here.
Does this work on a phone?
Yes. Chrome on Android and Safari on iOS both support the test, though iOS restricts which of the phone's microphones a browser can reach.
Is my audio uploaded anywhere?
No. The test uses the Web Audio API inside your browser. Nothing is sent to a server, and recordings live in memory until you close the tab or download them yourself.
Related tests
Carry on with: what the numbers mean, reading the waveform and spectrum, or setting up monitoring.
Tested and updated · Written and maintained by check-mic.com · Report a problem with this page