To test a microphone on Windows, press Start test above and speak. If the meter stays flat, open Settings, System, Sound and confirm the correct input is selected and not muted.
Test Microphone Windows — how to do it
- Choose your input
Use the device dropdown in the console. Windows commonly exposes several inputs — a webcam array, a headset, an interface — and only one of them is the one you mean.
- Start the test and speak
Watch for peaks between -24 dB and -6 dB. Below -42 dB is too quiet to be understood on a call; above -3 dB will distort.
- Cross-check in Sound settings
Right-click the speaker icon, open Sound settings, and confirm Windows shows the same device with the same activity.
- Set the input volume
In the device's properties, raise or lower the input volume until your normal speaking voice sits in the healthy range. Adjust here, not in the app.
- Record and listen
Use the Record panel to capture a sentence. Playback exposes hum, hiss, echo and keyboard noise that no meter can show you.
Windows microphone checklist
- Enhancements and effectsTurn off audio enhancements while testing. Noise gates in vendor software can cut the first word of every sentence.
- Default deviceSound Control Panel, Recording tab. Right-click your microphone and choose Set as Default Device and Set as Default Communication Device.
- Disabled devices are hiddenIn the Recording tab, right-click empty space and tick Show Disabled Devices. A disabled microphone is invisible everywhere else in Windows.
- Exclusive mode conflictsIn the device Advanced properties, clear Allow applications to take exclusive control. This is the usual cause of a mic that works only in the first app to open it.
Where Windows hides audio controls
Windows keeps microphone settings in three places and each can override the others. The Settings app handles device choice and privacy. The legacy Sound Control Panel handles levels, boost, exclusive mode and communications ducking. Vendor software such as Realtek Audio Console or Nahimic adds a third layer of effects.
When a microphone behaves differently in different applications, the cause is almost always one of these layers rather than the hardware. A browser test gives a fixed reference point: if the browser hears you clearly, everything below the application layer is working.
Common questions
Do I need admin rights?
No. The browser test needs nothing beyond microphone permission, which is why it works on locked-down work laptops.
Which browser is best?
Chrome, Edge and Firefox behave almost identically. Edge is convenient on Windows because it is already installed.
Can Windows test the mic without the internet?
Yes, through Sound settings and Voice Recorder. This page needs to load once, after which the test itself runs locally.
Does this test work on Windows 7 or 8?
Yes, as long as the browser is current. Older Internet Explorer builds cannot open a microphone at all.
Related tests
Related guides: the Windows 10 walkthrough, testing on Windows, or the Windows guide.
Tested and updated · Written and maintained by check-mic.com · Report a problem with this page